Fibra de carbono

Carbon fibers are fibers about 5-10 microns in diameter and composed mostly of carbon atoms.

To produce a carbon fiber, the carbon atoms are bonded together in crystals that are more or less aligned parallel to the long axis of the fiber as the crystal alignment gives the fiber high strength-to-volume ratio. Several thousand carbon fibers are bundled together to form a tow which may be used by itself,or chopped into small strands or woven into a fabric.

Main features

– high stiffness

– high tensile strength

– low weight

– high chemical resistance

– high temperature tolerance

– low thermal expansion

Carbon fiber is very popular in aerospace, civil engineering, military, and motorsports, along with other competition sports.

CHOPPED CARBON FIBER

PROPERTIES

  • Good compatibility with PC, PPO, PPS, PA
  • High Tensile strength and Modulus
  • High dimensional stability
  • Improve Electrical and Thermal Conductivity

MAJOR APPLICATIONS

Aerospace parts – Automotive parts – Electronic parts
Civil engineering – Sporting goods

SPECIFICATIONS

Reference Sizing Sizing Content (%) Cut length (mm)
ACECA-3E Epoxy 2.0 / 2.5 3
ACECA-6E Epoxy 2.0 / 2.5 6
ACECA-3P Polyurethane 2.5 / 3.0 3
ACECA-6P Polyurethane 2.5 / 3.0 6
ACECA-10P Polyurethane 2.5 / 3.0 10
ACECA-12P Polyurethane 2.5 / 3.0 12
ACECA-10U Unsized 0 10
ACECA-12U Unsized 0 12

UPON CUSTOMER’S REQUEST, SIZING AND CUT LENGTH CAN BE ADJUSTED.

TYPICAL MECHANICAL PROPERTIES

Tensile Strength (Mpa) Tensile Modulus (Gpa) Elongation (%) Resistivity ohm/cm Density g/cm3
Carbon CS 4510 221 1.90 1.60 x E-3 1.76

PACKAGING AND STORAGE

Each pallet of Chopped Carbon Fiber contains 36 boxes (net weight : 720 kg)
Each box is 38cm x 56cm x 23cm and contains 20kg net of Chopped Carbon Fiber in a PE bag.

Chopped Carbon Fiber should be stored in their original packaging. The temperature should not exceed
35°C and the relative humidity should be kept below 70 %.

FRP Services Europe reserves the right to change the information given herein without prior notice. We believe this information to be reliable but we do not guarantee its applicability to the user’s process or assume liability for occurrence arising out of its use. The user, by accepting Products described herein, agrees to be responsible for thoroughly testing any application before committing to production. March 2012

Download Carbon CS

CARBON FIBER Fabric & Spread Tow

MAJOR APPLICATIONS

Aerospace parts – Automotive parts – Electronic parts – Civil engineering – Sporting goods

SPECIFICATIONS

Carbon Fabric

Type Reference Structure Weight (g/m²) thickness (mm) Width (cm) Fiber Type Yarn Picks (count/25mm)
Warp Fill Warp Fill
1K C06142 Plain 119 0.15 100 T300-1K T300-1K 22.5 22.5
C06151B Plain 92 0.11 100 T300B-1K T300B-1K 17.4 17.4
C06158B 2x2 Twill 92 0.11 100 T300B-1K T300B-1K 17.4 17.4
3K C06343B Plain 198 0.23 100 T300B-3K T300B-3K 12.5 12.5
C06347B 2x2 Twill 198 0.22 100 T300B-3K T300B-3K 12.5 12.5
3K/Kevlar C07354 Plain 178/99 0.26 100 T300-3K/KV1420D T300-3K/KV1420D 6.25/6.25 6.25/6.25
C07359B 2x2 Twill 178/99 0.26 100 T300B-3K/KV1420D T300B-3K/KV1420D 6.25/6.25 6.25/6.25
6k C06644B Plain 317 0.30 100 T300B-6K T300B-6K 10 10
12k CK6244C Plain 210 0.22 100 T700SC-12K T700SC-12K 3.27 3.27
CK6247CW 2x2 Twill 210 0.27 100 T700SC-12K/TP Yarn T700SC-12K/TP Yarn 3.27 3.27
CK6261C Plain 480 0.61 100 T700SC-12K T700SC-12K 7.5 7.5

ABOVE PROPERTIES EXCEPT THICKNESS ARE FOR MATERIAL SELECTION PURPOSE ONLY.
THESE PROPERTIES DO NOT CONSTITUTE ANY WARRANTY OR GUARANTEE OF VALUES.

Carbon Spread Tow

Grade Type Yarn Fiber width (mm) Roll width (mm) Weight (g/m²) Thickness (mm) Length (m) Woven Structure
MW1018F CF/PAN 12K 20 1,000 80 0.035 50 Plain
MCP142 CF/PAN 12K 8 1,000 200 0.250 50 Plain
MCP143 CF/PAN 12K 10 1,000 160 0.075 50 Plain

STORAGE

Carbon Fiber Fabric and Carbon Spread Tow should be stored in their original packaging. The temperature should not exceed 35°C and the relative humidity should be kept below 70 %.

FRP Services Europe reserves the right to change the information given herein without prior notice. We believe this information to be reliable but we do not guarantee its applicability to the user’s process or assume liability for occurrence arising out of its use. The user, by accepting Products described herein, agrees to be responsible for thoroughly testing any application before committing to production. March 2013

Download Carbon Fabrics

CARBON PREPREG

SPECIFICATIONS

Grade Yarn Type Weave Structure Density Resin Content (%) Width (mm) Linear Length (m)
CUDP-H55/T700-E7 T700SC-12K(24T) UD 55 35.5±2 1000 100
CUDP-H75/T700-E7 T700SC-12K(24T) UD 75 35.5±2 1000 100
CUDP-H100/T700-E7 T700SC-12K(24T) UD 100 35.5±2 1000 100
CUDP-H125/T700-E7 T700SC-12K(24T) UD 125 35.5±2 1000 100
CUDP-H150/T700-E7 T700SC-12K(24T) UD 150 35.5±2 1000 100
CUDP-H200/T700-E7 Epoxy 2.0 / 2.5 3 Epoxy 2.0 / 2.5 3
T700SC-12K(24T) T700SC-12K(24T) UD 200 35.5±2 1000 100
CUDP-H1K117/T700-E7 T300B-1K 1K Plain or Twill 117 42±2 1000 100
CUDP-H3K205/T700-E7 T300B-3K 3K Plain or Twill 205 42±2 1000 100

30T,36T,40T, low temperature curing prepreg and other grades are available

STORAGE

Carbon Prepreg should be stored in their original packaging. The temperature should not exceed 35°C and the relative humidity should be kept below 70 %.

FRP Services Europe reserves the right to change the information given herein without prior notice. We believe this information to be reliable but we do not guarantee its applicability to the user’s process or assume liability for occurrence arising out of its use. The user, by accepting Products described herein, agrees to be responsible for thoroughly testing any application before committing to production. March 2013d

Download Prepreg

For more information, please contact us by filling out below form

    Get a cost estimate

    Please submit a detailed outline of your business requirement so that our team of experts could get in touch with you with a customised product/service cost estimate within the next 48 hours.

    REQUEST QUOTE

    Featured Products

    Composites

    FRP Services & Company offices in 18+ cities in 12+ countries

    Global Network

    HEADQUARTERS
    REGIONAL OFFICE
    INDIA
    SRI LANKA
    PAKISTAN
    PHILIPPINES
    VIETNAM
    HANOI REPRESENTATIVE OFFICE
    VIETNAM
    HO CHI MINH OFFICE
    TAIWAN
    SINGAPORE
    CHINA
    FRANCE
    UAE - DUBAI
    NORTH AMERICA - USA
    REGIONAL HEADQUARTERS
    NORTH AMERICA – CANADA
    REGIONAL BRANCH OFFICE
    SOUTH AMERICA
    BRAZIL REP OFFICE

    Meet Us

    Contact

    Composites Division

    Address: FRP SERVICES & COMPANY
    Yoshihashi Building 2F,
    13-10, Nihonbashi-Kobunacho,
    Chuo-ku, Tokyo,
    103-0024, Japan

    Telephone: +81 (6) 6535-1936
    Fax: +81 (6) 6535-1677

    Website: www.frpservices.com
    Email: inquiry@frpservices.com