Fillers & Admixtures
Calcium Carbonate (Filler)
Aluminium Hydroxide (for Fire Retardant agent)
Thixotropic agents : Fumed silica (Reolosil), Tokusil, Finesil
Magnesium Oxide
Talc
Antimony Trioxide
Iron Oxide
Clay
Glass Powder
Glass Beads
Wollastonite
Fumed Silica
Sales specifications
Grade | QS-09 | QS-10 QS-10LS |
QS-102 | CP 102 | QS-20 QS-20LS |
QS-30 | QS-30C | QS-40 |
---|---|---|---|---|---|---|---|---|
Appearance | White powder | |||||||
BET surface area (m²/g) | 90+/-20 | 140+/-20 | 200+/-20 | 200+/-20 | 220+/- 20 | 300+/-30 | 300+/- 30 | 380 +/-30 |
Primary particle (m/m) | 22 | 15 | 12 | 12 | 12 | 7 | 7 | 7 |
Bulk density (g/L) | 50 | 50 40 |
50 | 100 | 50 40 |
50 | 100 | 50 |
Moisture content(Dry up, %) | <1.5 | <1.0 | <1.5 | <1.5 | <1.5 | <2.0 | <2.0 | <2.0 |
Ph(4% suspension) | 4.2 | 4.2 | 4.2 | 4.2 | 4.2 | 4.2 | 4.2 | 4.2 |
SiO²(%) | >99.9 | >99.9 | >99.9 | >99.9 | >99.9 | >99.9 | >99.9 | >99.9 |
Cl (ppm) | <50 | <50 | <50 | <50 | <50 | <50 | <50 | <50 |
Fe(ppm) | <20 | <20 | <20 | <20 | <20 | <20 | <20 | <20 |
Al(ppm) | <20 | <20 | <20 | <20 | <20 | <20 | <20 | <20 |
44um residue (%) | <0.01 | <0.01 | <0.01 | <0.01 | <0.01 | <0.01 | <0.01 | <0.01 |
Packaging (kg) | 10 | 10 | 10 | 15 | 10 | 10 | 15 | 10 |
Hydroxypropil Methylcellulose
ShinEtsu
TYPE OF POLYMER
Hydroxypropyl Methylcellulose
1.Methyloxirane: REACH No.: 01-2119480483-35 :
2.Chlomethane: pre registration REACH No :05-2114650762-47 ( registration expected in 2013)
SPECIFICATIONS
Reference | Methoxyl content (%) | Hydroxypropoxyl content (%) | Moisture (%) | Ash content (Na2SO4) (%) | Viscosity range (2%, 20°C) mPa |
---|---|---|---|---|---|
METOLOSE 90SH - 15000 | 19 - 24 | '4 - 12 | max. 5.0 | max. 1.0 | 12,000 - 18,000 |
PACKAGING
METOLOSE 90SH-15000 is supplied in 4 plies paper bag (including three outside layers of craft paper and one internal layer of polyethylene film), each containing 20 kg net.
STORAGE
METOLOSE 90SH-15000 should be stored dry in its original packaging.
Storage temperature : max. 35 °C – Relative moisture : < 70 %
FRP Services Europe reserves the right to change the information given herein without prior notice. We believe this information to be reliable, but do not guarantee its applicability to the user’s process or assume liability for occurrence arising out of its use. The user, by accepting products described herein agrees to be responsible for thoroughly testing any application before committing to production. March 2007
WOLLASTONITE
PROPERTIES
Wollastonites are acicular mineral products milled to various morphologies and bulk densities. These products can be surface treated to enhance performance in thermoset and thermoplastic resins.
They increase mechanical properties (tensile, flexural, impact) and minimize distorsion at elevated temperatures, improve dimensional stability and provide low moisture absorption.
Component | Weight % |
---|---|
CaO | 46.70 |
SiO2 | 52.20 |
Fe2O3 | 0.15 |
Al2O3 | 0.25 |
MgO | 0.20 |
Loss of Ignition | 0.50 |
SPECIFICATIONS
Ref. | Average Diameter (microns) | Average Aspect Ratio | Loose Bulk Density (g/cc) | Tapped Bulk (g/cc) | Appearance |
---|---|---|---|---|---|
400U | 4.5 | 7.5 | 0.65 | 0.90 | Powder |
400S | 4.5 | 7.5 | 0.67 | 0.95 | Powder |
400H | 4.5 | 7.5 | 0.69 | 1.00 | Powder |
520U | 5 | 20 | 0.25 | 0.43 | Fiber |
520S | 5 | 20 | 0.32 | 0.50 | Fiber |
520H | 5 | 20 | 0.37 | 0.59 | Fiber |
720U | 5.5 | 20 | 0.32 | 0.60 | Fiber |
720S | properties to be determined | ||||
720H | 5.5 | 20 | 0.38 | 0.57 | Fiber |
800U | 3 | 9 | 0.46 | 0.65 | Powder |
800S | 3 | 9 | 0.49 | 0.66 | Powder |
800H | 3 | 9 | 0.61 | 0.81 | Powder |
905U | 9 | 5 | 0.72 | 1.10 | Powder |
905S | 9 | 5 | 0.76 | 1.08 | Powder |
905H | pproperties to be determined | ||||
915U | 9 | 15 | 0.50 | 0.83 | Fiber |
915S | 9 | 15 | 0.50 | 0.85 | Fiber |
915H | 9 | 15 | 0.67 | 0.96 | Fiber |
1515U | 15 | 15 | 0.66 | 1.15 | Fiber |
1515S | 15 | 15 | 0.58 | 0.97 | Fiber |
1515H | pproperties to be determined |
GLASS BEADS
PROPERTIES
YWGB09# Series
Sandblasting glass bead is powered by compressed air to spray glass beads onto the surface of workpiece with high speed and high pressure for shot peening and polishing processing,
It’s mainly used for cleaning all kinds of molds such as punching, forging glass , rubber, plastic,metal casting,extrusion,etc.It can eliminate tensile stress,increase fatigue life and improve wear resistance Normally its hardness ≥5.5density 2.4-2.6g/cm³.
We supply the sandblasting glass bead as per American standard
MIL-G-9954A.
Applications
1. Semi-luster surface treatment on stainless steel products.
2. Clean and polish moulds for punching, forging, metal casting, glass products,rubber products and others.
3. Eliminate all kinds of machine parts tensile stress ,increase fagitue life and improve wear resistance.For instance, alrcraft engine turbine,blade,axis,undercarriage,as well as all kinds of spring,gear hydraulic parts,etc.
4. Clean semiconductor device and plastic sealed pair pipe before plating tin and remove edge and burrs.
5. Remove blockage in piston and cylinder.
6. Clean coil,brush,rotor and other spare parts when the motor and generator are overhauled.
7. Clean and deburr various metal pipes and nonferrous metal precise casting Shotblastingenhancement and polishina from textile machinery components.
8. Provide bright and sub glossy surface for medical apparatus instruments and automobile spare parts.
Item | Mesh | Diameter (micron) |
---|---|---|
YWGB01# | 14-20 | 1400-850 |
YWGB02# | 52.20 | 52.20 |
YWGB03# | 20-30 | 850-600 |
YWGB04# | 30-40 | 600-425 |
YWGB05# | 40-50 | 425-300 |
YWGB06# | 50-70 | 300-212 |
YWGB07# | 60-80 | 250-180 |
YWGB08# | 212-150 | 0.50 |
YWGB09# | 90-150 | 180-125 |
YWGB10# | 100-170 | 150-90 |
YWGB11# | 120-200 | 125-75 |
YWGB12# | 140-230 | 106-63 |
YWGB13# | 170-325 | 90-45 |
PRODUCT DATA
Size (Diameter) | Between 0 and 800 um (see table Standard Sizes) |
Transformation temperature | 549°C |
Softening point (Littleton point) | 734°C |
Melting point | 1446°C |
Specific thermal Conductivity | 1.129 W/(mK) |
Thermal expansion | 9.05 10-6 K1 120 °C1 (Coefficient of linear expansion α) |
Specific thermal capatcity | 1.329 kj/kg K [>600 °C] |
Youngs-Module | 63 GPa |
Hardness according to Mohs | ≥6 |
Specific gravity(g/cm3) | 2.4-2.6 |
Refractive index | ≥1.5 |
Spherical beads (%) | ≥80 |
Arsenic | <=200ppm |
Lead | <=200ppm |
Antimony | <=200ppm |
PACKAGING
Packages just like the photo in right and the details are 25kgs/bag, 40bags/pallet, 20pallets per 20 feet container.
FRP Services Europe reserve the right to change the information given herein without prior notice. We believe this information to be reliable But we do not guarantee its applicability to the user’s process or assume liability for occurrence arising out of its use. The user, by accepting Products described herein, agrees to be responsible for thoroughly testing any application before committing to production.
For more information, please contact us by filling out below form
Get a cost estimate
Please submit a detailed outline of your business requirement so that our team of experts could get in touch with you with a customised product/service cost estimate within the next 48 hours.
Featured Products
Composites
FRP Services & Company offices in 18+ cities in 12+ countries
Global Network
HEADQUARTERS
- FRP SERVICES & COMPANY FRP bldg., 1-15-9 Awaza, Nishi-ku, Osaka Japan 550-0011
- +81 (6) 6535-1933
- inquiry@frpservices.com
REGIONAL OFFICE
- FRP SERVICES & COMPANY KDX Nihonbashi Edo-dori Bldg, 8F 3-9-4, Nihonbashi-honcho, Chuo-ku, Tokyo Japan 103-0023
- +81 (0) 3 5643 8061
- inquiry@frpservices.com
INDIA
- FRP SERVICES & CO INDIA PVT LTD, F 104, Ascot Centre, Sahar Airport Road, Andheri - East, Mumbai India 400099
- +91-22-28351401
- inquiry@frpservices.com
SRI LANKA
PAKISTAN
- FRP SERVICES & COMPANY (P.L.O) Business Arcade, 3rd Floor, Suit# 309, Shahrah-e-Faisal, Karachi Pakistan 75400
- +92 (21) 3432 7632
- inquiry@frpservices.com
PHILIPPINES
- TY COMPOSITE INTERNATIONAL CORPORATION National Highway Teco Industrial Park, Brgy. Bundagul, Mabalacat City, Pampanga 2010 Philippines
- +63-45-403-9914
- inquiry@frpservices.com
VIETNAM
HANOI REPRESENTATIVE OFFICE
- FRP SERVICES & COMPANY Room 402,04th floor, Vinahud Building, Trung Yen 9 road, Cau Giay District, Hanoi, Vietnam.
- +84 (24) 3728 2357
- inquiry@frpservices.com
VIETNAM
HO CHI MINH OFFICE
- FRP SERVICES & COMPANY CSI Business Centre, Room 202, 2th Floor, Ben Thanh Building 70 Ly Tu Trong Str, Ben Thanh Ward, District 1,Ho Chi Minh City, Vietnam
- +84 (28) 3827 2199
- inquiry@frpservices.com
TAIWAN
- TAIPEI REPRESENTATIVE OFFICE 7F-9, No. 207, Tung-Hwa North Road, Taipei, Taiwan
- +886 (2) 2713 3111
- inquiry@frpservices.com
SINGAPORE
- FRP SERVICES (ASIA) PTE LTD. 24 Raffles Place #17-04A Clifford Centre Singapore 048621
- +65 6270 5001
- inquiry@frpservices.com
CHINA
- FRP SERVICES & CO. SHANGHAI OFFICE Shanghai International Trade Center, 25 #2508, 2201 Yan An Road (West), Shanghai 200336, China
- +86-21-6209-5907
- inquiry@frpservices.com
FRANCE
- FRP SERVICES EUROPE SARL Square de l’Arbois Bât. B3 565 Rue René Descartes, 13857 Aix-en-Provence Cédex3, France
- +33 (0) 4 4297 5910
- inquiry@frpservices.com
UAE - DUBAI
- FRP SERVICES & COMPANY MIDDLE EAST (BRANCH) 4WA, 628, Dubai Airport Free Zone, Dubai, UAE
- +971 (4) 204 5050
- inquiry@frpservices.com
NORTH AMERICA - USA
REGIONAL HEADQUARTERS
- FRP SERVICES & CO. (AMERICA) INC. 535 Fifth Avenue, Suite 1008, New York, NY 10017, U.S.A
- +1 (212) 695 8000
- +1 (212) 695 3100
- inquiry@frpservices.com
NORTH AMERICA – CANADA
REGIONAL BRANCH OFFICE
SOUTH AMERICA
BRAZIL REP OFFICE
- FRP SERVICES & CO. (AMERICA) INC. Avenida Pompeia, 634 - Suite 501, Vila Pompeia, São Paulo, CEP 05022-000 Brazil
- +55 (11) 3589 5749
- +55 (11) 3589 5709
- inquiry@frpservices.com
Meet Us
Contact
Composites Division
Address: FRP SERVICES & COMPANY
FRP BLDG, 1-15-9 AWAZA,NISHI-KU,
OSAKA 550-0011,
Japan
Telephone: +81 (6) 6535-1936
Fax: +81 (6) 6535-1677
Website: www.frpservices.com
Email: inquiry@frpservices.com